Tel: +44(0) 1202 48 33 33
sales@reidsteel.co.uk
Home > Existing REID Factory Buildings > Industrial Factory Buildings
Large steel framed factory building for Gen Pack in Yemen, used to manufacture generators.
Note: The factory building is only sheeted from the eaves to 2.1m from the floor level This is the normal height of personnel doors and windows. If the sheeting is lower than this then there are many more trims and cutting of sheets. We try and encourage the use of masonry because sheeting often gets bumped by factory vehicles and fork lifts etc., making the sheeting look untidy. Sheeting may corrode if dirt and moisture builds up against it. If the sheeting ends at 2.1m above the ground then the sheeting is kept clean and dry. Also a masonry finish in the local stone gives a nice finish to the building. Find out more about sheeting